Surface coatings for radially oriented, anisotropic Nd-Fe-B ring magnets (NEOQUENCH-DR)
Due to the lack of porosity and lower Nd content, NEOQUENCH-DR has higher corrosion resistance than sintered Nd.
These magnets are rust free for a long time in dry air. However, in a humid environment, an appropriate surface protection (coating) is necessary. Daido Electronics Co., Ltd. provides two types of coatings.
Conditions | Epoxy electrodeposition coating 20 ~ 35 µm |
Ni plating 15 ~ 30 µm |
---|---|---|
Humidity test 80 ℃ × 95%RH × 1000 hrs |
B | B |
Water resistance * 1 Distilled water 40℃ × 96 hrs |
B | B |
Salt spray test * 2 5% NaCl (pH 6.5 ~ 8) |
B (300hr) | - - - |
Oil resistance * 1 Gear oil 20℃ × 24 hrs |
B | B |
Gasoline resistance * 1 Gasoline 20℃ × 24 hrs |
B | B |
Acid resistance * 1 10% H2SO4 20℃ × 8 hrs |
B | B |
Alkali resistance * 1 5% Na2CO3 40℃ × 6 hrs |
B | B |
Heat resistance * 1 Air 100℃ × 1 hr |
B | B |
Cycle crack test * 3 | B | B |
- 1: JIS D0202
- 2: JIS Z2371
- 3: Five cycles of the pattern below (JIS D0202)
- 4: Please consult with us about your preferred locations of electrode marks.