Ultra low impedance magnetization power sources

Ultra high output short pulse type high pressure oil condensor magnetizing power source
Stronger magnetic field, higher efficiency, aming at top evolved magnetizer

The pioneer of high output magnetizing yoke maker, Daido Electronics Co., Ltd. The pioneer of magnetizing devices maker, Nippon Denji Sokki Co., Ltd. Joint development brought the sophisticated magnetizer device.

Magnetizing power source for small multi poles High iHc magnets
Equipped with 16 bit microcomputer (CU-1-2)
Condensor with switch function of capacitance 200 micron F, 400 micron F
Maximum electric current 25 kA is achieved with 200 micron F.

Picture: Ultra low impedence magnetizing power source

Feature of ultra low impedance magnetizing power source

Higher output with decreasing internal impedance of power supply
- Special circuit construction with the shortest internal circuit.
- Booth bar is adopted for the output terminal.
Special version of charging capacitor is adopted.

Advantage in use

Solution for the multipole magnetization to a high H_CJ small diameter magnet.
10～20 % higher magnet performance can be expected than normal power source.
The load to the magnetizing yoke ( coil ) is light & low generation of heat, leading longer life.
Small & compact and saving installation space.

Specification

Power supply input	Single phase AC200V +/-10% 20A 50/60 Hz
Charge voltage	DC 100V～2500V
Charge canpacitance	Max 400 micro F … 200 micro F fixed. … 200 micro F with knife switch
Max magnetization current	… 200 micro F, 25 kA … 400 micro F, 30 kA
Charge time	app. 3 second
Charge energy	1250 J
Dimension	500 (w) × 980 (D) × 1290 (H) mm
Weight	app. 140 kg

Equipped with current judgement signal output function
Digital control by microcomputer CU-1-2

Sample dimension

	No.1	No.2
Magnet dimension	Od 2.4 × Id 0.8 × 4.6 mm	Od 2.1 × Id 0.8 × 1.85 mm
Magnetization specification	Outer diameter 10 poles magnetization	Outer diameter 12 poles magnetization
Magnetization pole pitch	0.75mm	0.55mm